TEMPERATURE AND HUMIDITY TEST CHAMBERS PH140 – FRIMED

Brand:

Category:

The PH140 TEMPERATURE AND HUMIDITY TEST CHAMBERS – FRIMED is a 1400L test chamber with precise temperature (10°C to +60°C) and humidity (20%-85% RH) control, ideal for laboratories and industrial applications. Its stainless steel interior, CFC-free insulation, and PID-controlled 9” touchscreen ensure efficiency and reliability. Equipped with a silent compressor, automatic fan stop, and safety thermostat, it meets European quality standards for stability testing and research

PH140 TEMPERATURE AND HUMIDITY TEST CHAMBERS – FRIMED

 

EQUIPMENT STRUCTURE

  • External structure: Made of hot-dip galvanized steel sheet with anti-corrosion properties, covered with a protective PVC film.
  • Internal structure: Made of Scotch Brite stainless steel with rounded corners for easy cleaning.
  • Insulation: 60mm thick insulation on all sides, made of high-density, CFC-free polyurethane foam to optimize product preservation and energy efficiency.

DOOR SYSTEM

  • Door type: Two solid self-closing doors.
  • Door gasket: Interchangeable magnetic gasket ensuring a perfect seal on all four sides.
  • Door lock: Equipped with a key lock for security.

INTERNAL EQUIPMENT

  • Shelves: 8 height-adjustable perforated shelves made of Scotch Brite stainless steel, mounted on sliding guides.

TEMPERATURE AND HUMIDITY CONTROL SYSTEM

  • Compressor: Silent hermetic compressor with thermal protection.
  • Cooling fan: Axial impeller motor fan for effective heat dissipation.
  • Evaporator: Finned evaporator with a powerful motorized fan ensuring uniform temperature and humidity distribution.
  • Heating system: Armored electrical heating resistor.
  • Humidification system: Water from a tank is evaporated and fed into the inner chamber.
  • Dehumidification: Moisture is condensed on the evaporator surface.
  • Automatic fan stop when the door is opened to prevent sudden changes in temperature and humidity.

ELECTRONIC CONTROL SYSTEM

  • Control panel: 9″ touch screen displaying actual temperature and humidity values.
  • PID Controller: Manages the internal chamber temperature.
  • Control Functions:
  • Device ON/OFF
  • Setting the desired operating temperature
  • Display of real-time humidity and temperature
  • Graphical temperature display
  • USB port for data download

SAFETY SYSTEM

  • High-temperature safety thermostat: Mechanical thermostat that automatically deactivates the heating system when the temperature exceeds the limit, with an external warning light.

HUMIDIFICATION SYSTEM (%)

  • Principle: Electrically heated humidification system with a peristaltic pump for precise water dosing.
  • Humidity sensor: Capacitive hygrometric sensor for RH% control.

TECHNICAL SPECIFICATIONS

  • Capacity: 1400 liters
  • Temperature range: 10°C to +60°C
  • Temperature stability: Better than ±1°C
  • Humidity range: 20% to 85% RH
  • Dew point: 5°C to +50°C
  • Humidity stability: Better than 3%…5%

DIMENSIONS AND WEIGHT

  • External dimensions (mm): 1400 x 950 x 1990 (W x D x H)
  • Internal dimensions (mm): 1280 x 670 x 1500 (W x D x H)
  • Weight: 225 kg

EUROPEAN STANDARDS COMPLIANCE

  • Low Voltage Directive 2014/35/UE
  • EMC Directive 2014/30/UE (Electromagnetic Compatibility)
  • Machinery Directive 2006/42/EC
  • RoHS II Directive 2011/65/EU (Restriction of Hazardous Substances)

Related products

Stability Chamber

PASS THROUGH OVENS – NEWTRONIC

Pass Through Ovens are designed to provide drying functionality with double doors on opposite sides, ensuring safe operation and preventing cross-contamination between areas.

Stability Chamber

Basic Salt Spray Tester Chamber

CME offer both a cyclic corrosion test chamber (SF-CCT) as well as a traditional salt spray chamber (SF-SST). The SF-CCT chambers are compatible with multiple test standards including automotive standards and they can be alternated/cycled between varied humidity programs with the traditional salt spray.

Stability Chamber

HUMIDITY STABILITY CHAMBERS – NEWTRONIC

Newtronic’s humidity stability chambers are designed to meet stability testing requirements in industries such as cosmetics, food, beverages, and others. The chambers fully comply with ICH conditions for real-time, intermediate, and accelerated testing. Additionally, they are compatible with advanced software supporting 21 CFR Part 11, ensuring strict data management compliance. The Newtronic Lifecare Chamber is an ideal device for creating a controlled environment with high precision in temperature and humidity. It is widely used in industries such as pharmaceuticals, food, and electronics.

Stability Chamber

WALK-IN COOLING CHAMBERS – NEWTRONIC

Walk-In Cooling Chambers are designed for precise temperature control in large-scale storage applications. They ensure uniform cooling and are ideal for industries such as pharmaceuticals, biotechnology, and food storage.

Stability Chamber

Nano BenchTop

CME’s Benchtop Chamber is the smaller version of Climatic Test Chamber, which is so compact & calm that it can be placed on a bench or a roll out cart next to your workspace without causing any hindrance.

Stability Chamber

Cyclic Salt Spray Chamber

Recent years have demonstrated that cyclic salt spray chambers provide a more realistic simulation of real-world corrosive environments compared to the traditional salt spray testing method. The salt spray test operates at a single temperature set point (ambient to 55°C) in continuous mode. This makes the cyclic corrosion test more reliable for evaluating corrosion resistance.

Stability Chamber

Climatic Chamber

The PAC series of climatic chambers are a great choice for cyclic low, high temperature and humidity tests. Built with the highest quality and reliability, this chamber can meet the most stringent testing needs of various international standards such as ASTM, IEC, MIL, DIN, etc.

Stability Chamber

Thermal Chamber

The thermal chamber is equipped with the latest simulation technology to provide customers with an unparalleled testing experience. The chamber features a highly responsive touchscreen controller (Envicom Graphite Series) with a wide range of features, including Chamber Analytics, On-demand cooling, on-screen diagnostics, and safety alarms. It also integrates with networking ports such as Ethernet, RS 232, RS 485, and a 2GB SD card for test data storage. Additionally, the chamber can be integrated with third-party software such as NI/LabVIEW.

PRODUCT VIEWED

TEMPERATURE AND HUMIDITY TEST CHAMBERS PH140 – FRIMED

The PH140 TEMPERATURE AND HUMIDITY TEST CHAMBERS - FRIMED is a 1400L test chamber with precise temperature (10°C to +60°C) and humidity (20%-85% RH) control, ideal for laboratories and industrial applications. Its stainless steel interior, CFC-free insulation, and PID-controlled 9” touchscreen ensure efficiency and reliability. Equipped with a silent compressor, automatic fan stop, and safety thermostat, it meets European quality standards for stability testing and research